SIENNA MAKER JACKET- Closet Case Patterns

18.00

Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.

With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and waist-cinching belt with D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid-thigh and View B ends at upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket.

See Below for more Info:

2 in stock

Description

SIENNA MAKER JACKET- Closet Case Patterns

Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.

With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and waist-cinching belt with D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid-thigh and View B ends at upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket.

SUGGESTED FABRIC

Durable woven fabrics like denim, twill, canvas and heavyweight linen.

YARDAGE REQUIREMENTS (45″/1.14M FABRIC)

View A (Full length jacket)
0-8 = 3.75yd / 3.5m, 10-14 = 4 yd / 3.75m, 16-20 = 4.5yd / 4.1m

View B (Mid length jacket)
0-8 = 3.5yd / 3.2m, 10-14= 3.75yd / 3.5m, 16-20 = 4 yd / 3.75m

View C (Cropped jacket)
0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25yd/3m

YARDAGE REQUIREMENTS (58″/1.5M FABRIC)

View A (Full length jacket)
0-8 = 3yd / 2.75m, 10-14 = 3yd / 3m, 16-20 = 3.5yd / 3.2m

View B (Mid length jacket)
0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 3.75m, 16-20 = 3.25 yd / 3m

View C (Cropped jacket)
0-8 = 2yd / 1.85m, 10-14 = 2.25yd / 2m, 16-20 = 2.5yd / 2m

ADDITIONAL SUPPLIES

  • Lightweight non-stretch fusible interfacing (View A = 1.25yd, View B = 1 yd, View C = .75yd)
  • Pocket lining (View C = .25yd)
  • Polyester thread (Topstitching thread optional)
  • View A & B only: D rings or belt slider (1.5″ / 38mm)
  • View C only: Buttons or snaps – 9 x 5/8″
  • Point turner and/or presser for collar
  • Marking tool
  • Optional: One set of snap buttons for collar
  • Optional: Bias tape for finishing seams
  • Optional: 5″/13cm twill tape or ribbon for hanging hook loop

Sewing level: Intermediate

Sizes: 0 – 20 (see our sizing chart here). For extended sizes 14-30, please see PDF version.

Finished measurements: See complete final measurements here

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.